Razor MX350 Electric Dirt Bike Upgrade to 36V or 48V
With a 36 Volt or 48 Volt kit, the motor power could be increased to 750, 1000, or even 1800 Watts. The limiting factor would be the battery pack size though since the MX350 and MX400 frames will only allow so much room for the battery pack. The smallest batteries that should be used with 36 or 48 Volt 750, 1000 or 1600 Watt motor are 12V 15Ah ...
Parts needed to upgrade 24v MX350 to 36v
I've been reading several forums on upgrading the razor mx350 to 36v and I want to be certain before I start ordering parts. Could you point me in the right direction regarding the specific controller, throttle, charger, batteries, and other parts I need to upgrade my sons 24v mx350 to a 36v . A parts list would be awesome.
Mx350 : ElectricScooterParts.com Support
Here is the correct wiring diagram for the version of MX350 that you have. If you are getting Voltage at the connector on the wiring diagram called the 'Battery Connector" then we can move forward with the troubleshooting. The Voltage at that connector should be around 27 Volts.
MX350 Upgrade List. : ElectricScooterParts.com Support
ESP Support. A 500 Watt motor is good for a 20 MPH top speed. A 750 Watt motor would be better for a 20 MPH top speed if the bike needs to climb hills. Along with installing a more powerful motor the bike's original 80 tooth sprocket could be replaced with a 55 tooth sprocket to increase the top speed to 20 MPH.
48v 1500W (replaced by 1800W) brushless motor install on Razor …
It affects only the top end speed of 27mph being cut to 17mph. Interestingly it didn't affect hill climb speed at all as it was under 17mph at full power. We used this when our younger son wanted to try riding this bigger MX650 bike after having ridden the MX350. It was nice being able to limit the speed for him to give it a try.
MX650 Upgrade path - What's the biggest motor I can swap in?
ESP Support. The 36 Volt 1000 Watt motor (item # MOT-361000) is longer than the MX650's original motor so it will not fit in the frame unless major modifications are made to it. We have a 36 Volt 800 Watt motor (item # MOT-36800) that will fit in the MX650 frame and if an 800 or 1000 Watt controller is installed along with it will provide 150 ...
Need more Torque and longer Run Time for Razor MX650
Hello and thank you for starting this topic. Regarding Option 1: This is a safe and dependable way to increase torque and runtime. Lowering the gear ratio by installing a smaller motor sprocket and/or larger wheel sprocket will increase torque and hill climbing ability (at the expense of a slower top speed).
Razor MX350 MX400 dirt bike variable speed mods
We carry a plug-and-play variable speed throttle and controller kit for Razor MX350 version 9-32, item # RAZ-EKIT8:
MX650 48V 1800W Upgrade with Removable Lithium Batteries?
ESP Support. The controller in our 48 Volt 1800 Watt MX650 kit has a 40 Amp current limit so it would be a good idea to see what the maximum continuous current rating of the Ryobi ONE+ 6Ah 18V battery is to make sure they can handle the amount of power that the controller will demand from them. If three of the 18V batteries were wired in series ...
Razor 350 motor burnt looking to upgrade
ESP Support. said 7 years ago. From looking at photos up upgraded MX350 dirt bikes it looks like a 750 Watt or 1000 Watt motor would be just about as easy to install as a smaller 250 or 350 Watt motor. When upgrading from the original 24 Volt 250 Watt motor to a 36 Volt 750 or 1000 Watt motor the gear ratio could then be raised to make the bike ...