The VNA and VVM options for the Site Master MS2085A and MS2089A portable analyzers are now available, with existing ...

By using op amps powered from a bipolar supply and ground-referencing the sensor signals, the op amp’s output will be at zero ...

Key applications include: 5G NR & LTE signal validation, complex IQ demodulation, real-time signal and interference hunting, RF component characterization, etc. 110 MHz real-time analysis bandwidth ...

The amplifier is designed using 2 ìm InGaP HBT process for high frequency applications. Driver amplifier shows gain of 1dB at 40 ... Linear power output from 22 to 28dBm. ; Works with multiple power ...

Component distributor Richardson RFPD has prepared a couple of documents on the options available for designers of RF amplifiers. Rather than in-depth, they are a useful introduction to the different ...

RFLN04C is a single stage low noise amplifier with flat gain, low Noise Figure, high isolation, stability. The LNA is designed to operate from 2-6 GHz using 0.1um GaAs pHEMT process. The designed LNA, ...

[Trax] sent in his writeup on this RF modem with built in 250mW amplifier. The original power of the RF transceiver was around 10mW, his final results after testing were nearly 250mW. He was able ...